BLUENOSE "EVERYTHING YOU NEED" CANADIAN SCHOONER
 |
|||||
SAVE OVER $67.00!
Everything You Need To Build & Display Your Bluenose Includes the Bluenose kit, Ship Modeler’s Tool Set, a 96-page modeler’s guide, 12 bottles of paint, 6 paint brushes, walnut display board and two brass pedestals. $279.61 if purchased separately, now it’s all yours for just $239.99 – a savings of over $67.00! YOU GET THE BLUENOSE KIT AND ALL THIS! MS102 Shipmodeler's Basic Tool Set Hobby knife, 10 cutting and carving blades, sandpaper assortment, tweezers, three miniature files, block threader and jeweler's pin vise with six fine diameter drills—24 pieces in all! Book - How To Build First Rate Ship Models From Kits By Ben Lankford. Comprehensive reference addresses all the important questions of building a first-rate ship model. Book discusses materials, tools, hull construction, deck furniture, rigging and masting, finishing and display. 96 pgs. softcover. MS2130MS Bluenose Paint set Twelve 1 oz. bottles of Model Shipways paints; 2 each/MS4839 Primer, MS4830 Hull/Spar Black, MS4814 Hull Bottom Copper Red; 1 each/MS4831 White, MS4818 Deep Brown, MS4825 Deck Light Gray, MS4821 Deck House Light Buff, MS4809 Bright Yellow Trim, MS4828 Iron/Cannon Black. YNB101 6-pc. Brush set Set of high quality nylon brushes includes #1, #5/0 and #10/0 round detailers plus #4, #6 and #8 flat shaders. Lacquered wooden handles. KH001 Super Glue - .35 oz. .7 oz bottle. Formulated especially for wood, sets in 5-30 seconds. RH4520 Walnut Display Base Routed and ready for finishing. 20" x 4-1/2". MS0812 & MS0813 Brass Pedestals Pre-drilled and slotted to fit the keel. BLUENOSE The schooner Bluenose was built in Nova Scotia in 1921 to fish the rough waters off the coast of Newfoundland. A salt banker type, she stayed out until her holds were full, using salt to preserve the catch. Bluenose was lost on a reef near Haiti in 1946, but an exact replica was launched in 1963. Model Shipways’ kit is the most authentic representation of any Bluenose available. Plank-on-bulkhead construction uses laser cut basswood parts for a perfect fit. Flexible basswood strips are supplied for planking the hull. Fittings are true to the originals, and include wooden blocks and deadeyes, brass rings and eyebolts, plus Britannia metal bilge pump, fife rail and anchors. Three diameters of rigging line and cotton sailcloth ensure an impressive model. (Display base with brass pedestals not included.) Intermediate Level • Model Shipways No. MS2130CB Length 32" / Height 26-1/2" / Scale 3/16" = 1 ft. (1:64)
Available [
Yes
] – In Stock:[
8
] |
|||||
Item #: MS2130CB |
Price: $
239.99
|
||||
)
)
)
)
)
)
)
)
)
)
)
){kind=link}
